Magnetic Compass JUPITER & NAVIPOL

Reliable Navigation

Defence
Commercial
Back to Top

NAVIPOL Specifications:

TECHNICAL DATA  
Standard power supply 230 VAC or 115 VAC or 24 VDC
Emergency power supply 230 VAC or 115 VAC or 24 VDC
Weight 60 KG

 

NAVIPOL SERIES  
NAVIPOL I Standard & Steering Compass Reflector Binnacle. The length of the reflector tube is determined by a + b. Reflector tubes are available in the following lengths: 1000, 1500 and 2000 mm
NAVIPOL II Standard & Steering Compass Binnacle
NAVIPOL III Steering Compass Binnacle with Window
NAVIPOL U Standard & Steering Compass Reflector Binnacle with a Bypass Arrangement

Universal Digital Repeater Specifications:

ENVIRONMENT  
Vibration 2 Hz to 100 Hz to IEC 60945
Temperature range -25° C to +70° C
Protection grade Rear IP32 to DIN 40050, Front IP 65 to DIN 40050

 

POWER REQUIREMENTS  
Power 18 to 36 VDC
Power consumption 5 W
Signal input One RS422 input

 

PROTOCOLS  
NMEA 0183 Heading gyro, heading magnetic, roll, pitch, rate of turn, X-rate, Y-rate, water speed, ground speed, transverse water speed, transverse ground speed, total / daily miles, wind speed, wind angle, rudder angle, depth, air temperature, water temperature, time, revolutions per minute, heave
Lehmkuhl Heading
Course to Steer Indicator Steer
Status Input Opto-coupler, rating 24V / 10 mA freeze mode, 180° heading change mode
Signal Output One RS422
Protocols VDR Specified for the Sperry Marine Voyage Data Printer
Status output Open collector, rating 50 V / 500 mA. Status change according to speed input (threshold can be set in the setup menu)

 

DIMENSIONS WEIGHT - CONSULE VERSION  
Front plate 96 x 96 mm to DIN Standard
Depth 145 mm (including cable clearance behind housing)

 

WATERTIGHT HOUSING WITH BRACKET ATTACHMENT
Width, Height, Depth 158 mm, 155 mm, 154 mm (including cable clearance behind housing)

Flux-Gate Specifications:

The Sperry Marine flux-gate is an in-house development which combines modern electronic technology with SMD manufacturing techniques to produce a very compact unit which also incorporates a fully integrated sine / cosine interface.

  • A combination of modern electronic technology and SMD manufacturing techniques
  • Fully integrated sine/cosine interface
  • Power requirements 12 V ± 20%
  • Power rating 40mA
  • Output voltage ± 3.75 VDC (variable ± 1.5 V to ± 4 V)
  • Adapter kit available for attachment to non Sperry Marine magnetic compasses
  • Type approved in accordance with the Marine Equipment Directive (MED) 96/98/EC in combination with a JUPITER magnetic compass
  • Dimensions: body 70 mm Ø, height 34 mm, mounting base 80 mm Ø